Loading the content...
Navigation

Shop

Return to Previous Page
Description

Description

The RS485PB-NR communication interface make it possible to establish wired RS485 communication. With this communication interface you can configure inverter parameters with a communication product and view momentary values of the inverter. The following inverter models are supported by the communication interface:

  • SB/SWR/WB 700
  • SB/SWR/WB 1100(E) (LV)
  • SB/SWR/WB 1700 (E)
  • SWR 2000
  • SB 2100TL
  • SB/SWR/WB 2500
  • SB/WB 2800i
  • SB/SWR/WB 3000
  • SB/WB 3300
  • SB/WB 3800.

The RS485PB-NR communication interface comply with the TIA/EIA-485-A-1998 standard.

The interface are provided as an add-on kit or are pre-installed in the inverter.

More Info

Additional information

Weight1 oz

Related Products

SMA SUNNY WEBBOX-BT-20

System monitoring, remote diagnosis, data storage and visualization: the Sunny WebBox is the high-performance communication hub for medium- to large-scale solar power plants. It continuously collects all the data from the inverters on the system side, thereby keeping you informed of the system‘s status at any given time. The Sunny...

SMA WEBCONNECT FOR TL-22 AND SUNNY TRIPOWERS

Ideally suited for online monitoring of small PV systems with a maximum number of up to four inverters: Webconnect provides free access to Sunny Portal without additional data logger – easily via an existing Internet access and a DSL router. After the simple installation of the inverter interface which is...

SMA 485 QUICK MODULE FOR “HF” INVERTER 485QMUS-10-NR

The RS485-Quick Module is provided as an upgrade kit or included in the scope of delivery of the inverter.The RS485-Quick Module is only suitable for use with SMA inverter of type Sunny Boy 2000HF/2500HF/3000HF. Please also observe the installation guide of the respective inverter.The RS485-Quick Module is equipped with an...

SMA SUNNY WEBBOX

System monitoring, remote diagnosis, data storage and visualization: the Sunny WebBox is the high-performance communication hub for medium- to large-scale solar power plants. It continuously collects all the data from the inverters on the system side, thereby keeping you informed of the system‘s status at any given time. The Sunny...

SMA RS485 INTERFACE TYPE DATA MODULE AS RETROFIT KIT DM-485CB-US

The 485 Data Module enables you to setup cable-connected RS485 communication for SMA inverters.

SMA BLUETOOTH PIGGY BACK CARD BTPBINV-NR

The RS485-Quick Module is provided as an upgrade kit or included in the scope of delivery of the inverter.The RS485-Quick Module is only suitable for use with SMA inverter of type Sunny Boy 2000HF/2500HF/3000HF. Please also observe the installation guide of the respective inverter.The RS485-Quick Module is equipped with an...

SMA PIGGY BACK WITH ETHERNET COMMUNICATION US SWPB-US-10

Webconnect for classic US-12 and TL-12 inverters. The SMA Bluetooth Piggyback Card allows to communicate with the Sunny Beam or Sunny WebBox via wireless bluetooth technology. Install one card per each inverter that needs to be monitored. The range of the SMA Bluetooth Piggyback Card is 150ft in open air;...

SMA SUNNY SENSOR BOX

The Sunny SensorBox is installed directly onto the modules and measures solar irradiation and, optionally, wind speed and ambient temperatures. Combined with Sunny WebBox and Sunny Portal, it provides continuous target-actual comparison of the plant performance. This makes it possible to detect shading, dirt, and a gradually declining array performance,...

SMA BLUETOOTH PIGGY BACK PLUS BTPB-EXTANT-NR/US

The SMA Bluetooth Piggyback Card / Module works with Sunny Boy Inverter & Sunny Mini Central systems. The SMA Bluetooth Piggyback Card allows to communicate with the Sunny Beam or Sunny WebBox via wireless bluetooth technology. Install one card per each inverter that needs to be monitored. The range of...

SMA RS485 INTERFACE TYPE DATA MODULE AS RETROFIT KIT DM-485CB-US

When used in conjunction with SMA Sunny Data software, the USB service interface allows the customer to set the parameters of SMA inverters during start-up and to read error statuses for servicing purposes. The USB service interface may not be used for permanent installations. This cable features a USB connector...
Back to top