Description More Info
Description
The 485 Data Module enables you to setup cable-connected RS485 communication for SMA inverters.
Additional information
| Weight | 1 oz |
|---|
Related Products
SMA SUNNY WEBBOX-BT-20
System monitoring, remote diagnosis, data storage and visualization: the Sunny WebBox is the high-performance communication hub for medium- to large-scale solar power plants. It continuously collects all the data from the inverters on the system side, thereby keeping you informed of the system‘s status at any given time. The Sunny...
SMA BLUETOOTH PIGGY BACK CARD BTPBINV-NR
The RS485-Quick Module is provided as an upgrade kit or included in the scope of delivery of the inverter.The RS485-Quick Module is only suitable for use with SMA inverter of type Sunny Boy 2000HF/2500HF/3000HF. Please also observe the installation guide of the respective inverter.The RS485-Quick Module is equipped with an...
SMA RS485 INTERFACE TYPE DATA MODULE AS RETROFIT KIT DM-485CB-US
When used in conjunction with SMA Sunny Data software, the USB service interface allows the customer to set the parameters of SMA inverters during start-up and to read error statuses for servicing purposes. The USB service interface may not be used for permanent installations. This cable features a USB connector...
SMA WEBCONNECT FOR TL-22 AND SUNNY TRIPOWERS
Ideally suited for online monitoring of small PV systems with a maximum number of up to four inverters: Webconnect provides free access to Sunny Portal without additional data logger – easily via an existing Internet access and a DSL router. After the simple installation of the inverter interface which is...
SMA BLUETOOTH PIGGY BACK PLUS BTPB-EXTANT-NR/US
The SMA Bluetooth Piggyback Card / Module works with Sunny Boy Inverter & Sunny Mini Central systems. The SMA Bluetooth Piggyback Card allows to communicate with the Sunny Beam or Sunny WebBox via wireless bluetooth technology. Install one card per each inverter that needs to be monitored. The range of...
SMA 485 QUICK MODULE FOR “HF” INVERTER 485QMUS-10-NR
The RS485-Quick Module is provided as an upgrade kit or included in the scope of delivery of the inverter.The RS485-Quick Module is only suitable for use with SMA inverter of type Sunny Boy 2000HF/2500HF/3000HF. Please also observe the installation guide of the respective inverter.The RS485-Quick Module is equipped with an...
SMA PIGGY BACK WITH ETHERNET COMMUNICATION US SWPB-US-10
Webconnect for classic US-12 and TL-12 inverters. The SMA Bluetooth Piggyback Card allows to communicate with the Sunny Beam or Sunny WebBox via wireless bluetooth technology. Install one card per each inverter that needs to be monitored. The range of the SMA Bluetooth Piggyback Card is 150ft in open air;...
SMA RS485 COMMUNICATION MODULE 485USPB-NR
The RS485PB-NR communication interface make it possible to establish wired RS485 communication. With this communication interface you can configure inverter parameters with a communication product and view momentary values of the inverter. The following inverter models are supported by the communication interface: SB/SWR/WB 700 SB/SWR/WB 1100(E) (LV) SB/SWR/WB 1700 (E)...
SMA SUNNY SENSOR BOX
The Sunny SensorBox is installed directly onto the modules and measures solar irradiation and, optionally, wind speed and ambient temperatures. Combined with Sunny WebBox and Sunny Portal, it provides continuous target-actual comparison of the plant performance. This makes it possible to detect shading, dirt, and a gradually declining array performance,...
SMA SUNNY WEBBOX
System monitoring, remote diagnosis, data storage and visualization: the Sunny WebBox is the high-performance communication hub for medium- to large-scale solar power plants. It continuously collects all the data from the inverters on the system side, thereby keeping you informed of the system‘s status at any given time. The Sunny...
